This is something that has been increasingly prevalent with my server, for the longest time I could torrent, have two people watching and everything’s fine, but lately, especially with specific shows, it will take upwards of a minute for a show to start.
I’ve looked into it and the culprit is ffmpeg most of the time, I assume this has something to do with the specific files not having transcoding “baked in” but I don’t know enough to know if that’s the case. Can anyone help me optimize my pipeline at all?
A. Run a batch transcode with Handbrake and make all your stored files compatible with your end players.
It sounds like the more recent things you are downloading are in a codec that is not compatible with your playback devices. E.g, older torrents are frequently an H.264 stream in an MP4 container, which practically every device can play now. Many modern releases are being distributed in H.265 or AV1, as they have significant size and quality benefits, but many older devices don’t support them natively. so it is forcing Jellyfin to live transcode to h.264. Find out what older titles play without any buffer or playback lag/high CPU usage and check what codec those files are in. That is what you’ll need to batch encode everything over to.B. Sounds like you are still relying on CPU transcoding which is absolute dog. What mini pc specs do you have? If it’s an AMD or Intel CPU/APU then it should have hardware encode/decode included in it’s integrated GPU. When using hardware transcoding the CPU load is generally minimal for 1 to 2 streams. See the Jellyfin docs on hardware acceleration here.
I’ve tried handbrake before, unfortunately the system DOES NOT have the horsepower to handle it, as in a batch of 30 episodes if I recall would have taken about 3 days
As for the system itself here’s the spec sheet !
You should not be having transcode issues with anything less than four concurrent streams on that server. https://www.reddit.com/r/PleX/comments/1ae6683/intel_n100_vs_ryzen_7_1700_1st_gen_an_interesting/
It’s likely that you have hardware transcoding disabled. Enable it, and these issues should go away. This forum post has good settings in jellyfin for an n100, https://forum.jellyfin.org/t-solved-correct-transcoding-settings-for-the-n100-processor
You should be able to find instructions for enabling hardware encoding in your bios by searching for it with your specific device model.
*edit
Handbrake does a bad job of explaining the difference between software encoding and hardware encoding. Or at least, it felt that way to me when I last used it. You likely were trying to software encode your videos, which, while theoretically makes the end result better quality, definitely won’t be quick on an n100. You’ll want to pick the option that has intel quicksync/qsv in it in order to get the most speed out of your handbrake encodes. https://www.reddit.com/r/handbrake/comments/z2m814/comment/kxu2a8x/
